Industrial Engraving Materials Manufactures

Signvec manufactures a wide range of engraving materials which you can experience the color of engraving when using engraving equipments. There are several methods you can take and the three most popular methods of coloring for using engraving equipments are oxidizing, paint stick and paint filling.

Generally oxidizing process uses a mild acid to blacken the brass or aluminum surface where the engraving is performed. Since the oxidizing is not selected on where it works on the engraving equipment, it can be used only on metals that already have some kind of coating which is already removed through the engraving process. Brass has a lacquer coating or a similar finish and the aluminum is usually coated with lacquer or it can be anodized. Remove those finishes with engraving equipment which has diamond graver, burnishing or rotary cutter by which you can blacken the exposed areas with the oxidation solution without affecting the other areas of the plate.

Oxidizing substance is best applied with the cotton swabs as opposed to a dauber and always remembers to keep the engraver free from oil or fingerprints. Apply oxidizer soon after the engraving process is completed, so the full effect of the oxidizer can be applied in the process. Applying color to the work of engraving equipment using a paint stick can be done only on rotary engraved plates which have a sufficient depth level. This is usually done using paint through a paint stick that looks like a large crayon and they come in a variety of colors and are easy to use.

To remove the skin of the paint stick just shave the end of the stick, then rub the stick across the engraving surface as if using the crayon until all the letters are filled and then wipe off the excess paint with a paper towel as well. Both alcohol and paint thinner work well in removing any excess film that does not wipe away easily, but you will find it much easier to let the paint dry overnight and later wash it with warm water. Paint sticks are convenient and durable, but they don't have smooth gloss that you'll get from actual paint.

Paint filling offers the best options for coloring the work of engraving equipment when it comes to materials, colors and applications. Metals and rigid plastics generally work best with fast-drying, oil based enamel with mineral spirits for cleaning. Soft plastics and other materials may be damaged by caustic solvents, but latex or acrylic paints work best with alcohol or water used for cleanup. Aside from the paint, you will also need a brush, an old phone book or newspaper and stiff pieces of tough paper closer to the size and weight of your average business card.

Each time you need to make sure that the engraving is smooth and have enough depth in holding the paint on its surface. When using engraving equipments, you'll require coloring options. The right method depends on the material and depth of the paint. Coloring gives the engraver more to work during the creation of an attractive sign with eye catching lettering and it is always best to have options.

In order to Find out More information about EngravingMaterial.Please Be Touched with us Today Onwards..!